Elektronika.lt :: Peržiūrėti temą

Elektronika.lt portalo forumas

Jūs esate neprisijungęs lankytojas. Norint dalyvauti diskusijose, būtina užsiregistruoti ir prisijungti prie forumo. Prisijungę galėsite kurti naujas temas, atsakyti į kitų užduotus klausimus, balsuoti forumo apklausose.

Administracija pasilieka teisę pašalinti pasisakymus bei dalyvius, kurie nesilaiko forumo taisyklių. Pastebėjus nusižengimus, prašome pranešti.

Dabar yra 2024 12 28, 09:00. Visos datos yra GMT + 2 valandos.

Forumas » Mikrovaldikliai » Atmega8 + ds18b20

Jūs negalite rašyti naujų pranešimų į šį forumą
Jūs negalite atsakinėti į pranešimus šiame forume
Jūs negalite redaguoti savo pranešimų šiame forume
Jūs negalite ištrinti savo pranešimų šiame forume
Jūs negalite dalyvauti apklausose šiame forume

Puslapis 1 iš 1

Rodyti ankstesnį pranešimą :: Rodyti kitą pranešimą

Atmega8 + ds18b20

Parašytas: 2013 12 28, 16:23

maklas

Dažnas dalyvis

Sveiki, esu naujokas elektronikoje... Susidūriau su bėda jungdamas temperatūros sensorių prie mikrovaldiklio.

Simuliacijos programoje tikrinant schemą gaunu labai daug klaidų:
http://www.part.lt/img/d28f3e693ec8092ac0398ce60a65c6f4306.png

Galbūt kas padėtų? Smile

main.c

Kodas:

#include <avr/io.h>
#include <stdio.h>
#include "lcd.h"
#include "tsensorius.h"

char temp[4];

int main(void)
{
int i=0;
//DDRB |= 1;

InitLCD(LS_BLINK|LS_ULINE);
LCDClear();
LCDWriteStringXY(0,0,"Lauko");
LCDWriteStringXY(8,0,"Variklio");
//LCDWriteStringXY(1,1,"26 C");
//LCDWriteStringXY(11,1,"78 C");
while(1)
{
      i = (i+1)%10;
      char x[4]={0};
      therm_read_temperature(x);
      sprintf(temp,"%s",x);
      LCDWriteStringXY(1,1,temp);
}
}

tsensorius.h

Kodas:

#include <avr/io.h>
#include <stdio.h>

#ifndef F_CPU
#define F_CPU 3000000UL //Your clock speed in Hz (3Mhz here)
#endif

#define LOOP_CYCLES 8 //Number of cycles that the loop takes
#define us(num) (num/(LOOP_CYCLES*(1/(F_CPU/1000000.0))))

#define THERM_PORT PORTB
#define THERM_DDR DDRB
#define THERM_PIN PINB
#define THERM_DQ PB5
/* Utils */
#define THERM_INPUT_MODE() THERM_DDR&=~(1<<THERM_DQ)
#define THERM_OUTPUT_MODE() THERM_DDR|=(1<<THERM_DQ)
#define THERM_LOW() THERM_PORT&=~(1<<THERM_DQ)
#define THERM_HIGH() THERM_PORT|=(1<<THERM_DQ)
/* list of these commands translated into C defines:*/
#define THERM_CMD_CONVERTTEMP 0x44
#define THERM_CMD_RSCRATCHPAD 0xbe
#define THERM_CMD_WSCRATCHPAD 0x4e
#define THERM_CMD_CPYSCRATCHPAD 0x48
#define THERM_CMD_RECEEPROM 0xb8
#define THERM_CMD_RPWRSUPPLY 0xb4
#define THERM_CMD_SEARCHROM 0xf0
#define THERM_CMD_READROM 0x33
#define THERM_CMD_MATCHROM 0x55
#define THERM_CMD_SKIPROM 0xcc
#define THERM_CMD_ALARMSEARCH 0xec
/* constants */
#define THERM_DECIMAL_STEPS_12BIT 625 //.0625

void therm_delay(uint16_t delay);
uint8_t therm_reset();
void therm_write_bit(uint8_t bit);
uint8_t therm_read_bit(void);
uint8_t therm_read_byte(void);
void therm_write_byte(uint8_t byte);
//
void therm_read_temperature(char *buffer);
void therm_read_temperature2(int8_t *digi, uint16_t *deci);

tsensorius.c

Kodas:

#include "tsensorius.h"

void therm_delay(uint16_t delay)
{
while(delay--) asm volatile("nop");
}

uint8_t therm_reset()
{
uint8_t i;
//Pull line low and wait for 480uS
THERM_LOW();
THERM_OUTPUT_MODE();
therm_delay(us(480));
//Release line and wait for 60uS
THERM_INPUT_MODE();
therm_delay(us(60));
//Store line value and wait until the completion of 480uS period
i=(THERM_PIN & (1<<THERM_DQ));
therm_delay(us(420));
//Return the value read from the presence pulse (0=OK, 1=WRONG)
return i;
}

void therm_write_bit(uint8_t bit)
{
//Pull line low for 1uS
THERM_LOW();
THERM_OUTPUT_MODE();
therm_delay(us(1));
//If we want to write 1, release the line (if not will keep low)
if(bit) THERM_INPUT_MODE();
//Wait for 60uS and release the line
therm_delay(us(60));
THERM_INPUT_MODE();
}

uint8_t therm_read_bit(void)
{
uint8_t bit=0;
//Pull line low for 1uS
THERM_LOW();
THERM_OUTPUT_MODE();
therm_delay(us(1));
//Release line and wait for 14uS
THERM_INPUT_MODE();
therm_delay(us(14));
//Read line value
if(THERM_PIN&(1<<THERM_DQ)) bit=1;
//Wait for 45uS to end and return read value
therm_delay(us(45));
return bit;
}

uint8_t therm_read_byte(void)
{
uint8_t i=8, n=0;
while(i--)
{
   //Shift one position right and store read value
   n>>=1;
   n|=(therm_read_bit()<<7);
}
return n;
}

void therm_write_byte(uint8_t byte)
{
uint8_t i=8;
while(i--)
{
   //Write actual bit and shift one position right to make the next bit ready
   therm_write_bit(byte&1);
   byte>>=1;
}
}

void therm_read_temperature(char *buffer)
{
// Buffer length must be at least 12bytes long! ["+XXX.XXXX C"]
uint8_t temperature[2];
int8_t digit;
uint16_t decimal;
//Reset, skip ROM and start temperature conversion
therm_reset();
therm_write_byte(THERM_CMD_SKIPROM);
therm_write_byte(THERM_CMD_CONVERTTEMP);
//Wait until conversion is complete
while(!therm_read_bit());
//Reset, skip ROM and send command to read Scratchpad
therm_reset();
therm_write_byte(THERM_CMD_SKIPROM);
therm_write_byte(THERM_CMD_RSCRATCHPAD);
//Read Scratchpad (only 2 first bytes)
temperature[0]=therm_read_byte();
temperature[1]=therm_read_byte();
therm_reset();
//Store temperature integer digits and decimal digits
digit=temperature[0]>>4;
digit|=(temperature[1]&0x7)<<4;
//Store decimal digits
decimal=temperature[0]&0xf;
decimal*=THERM_DECIMAL_STEPS_12BIT;
//Format temperature into a string [+XXX.XXXX C]
sprintf(buffer, "%+d.%04u C", digit, decimal);
}

void therm_read_temperature2(int8_t *digi, uint16_t *deci)
{
// Buffer length must be at least 12bytes long! ["+XXX.XXXX C"]
uint8_t temperature[2];
int8_t digit;
uint16_t decimal;
//Reset, skip ROM and start temperature conversion
therm_reset();
therm_write_byte(THERM_CMD_SKIPROM);
therm_write_byte(THERM_CMD_CONVERTTEMP);
//Wait until conversion is complete
while(!therm_read_bit());
//Reset, skip ROM and send command to read Scratchpad
therm_reset();
therm_write_byte(THERM_CMD_SKIPROM);
therm_write_byte(THERM_CMD_RSCRATCHPAD);
//Read Scratchpad (only 2 first bytes)
temperature[0]=therm_read_byte();
temperature[1]=therm_read_byte();
therm_reset();
//Store temperature integer digits and decimal digits
digit=temperature[0]>>4;
digit|=(temperature[1]&0x7)<<4;
//Store decimal digits
decimal=temperature[0]&0xf;
decimal*=THERM_DECIMAL_STEPS_12BIT;
//results
*digi = digit;
*deci = decimal;
}

Paskutinį kartą redagavo maklas, 2013 12 28, 17:58. Redaguota 1 kartą

Atmega8 + ds18b20

Parašytas: 2013 12 28, 17:44

pcwortex

Užkietėjęs dalyvis

tingiu visa ziureti koda, bet i main.c pradzioje irasyk tokias eilutes. Nes main.c faile nera nurodyta kokias bibliotekas naudosi

Kodas:

#include <avr/io.h>
#include <stdio.h>

_________________
Diplomas tik etikete ant konservų dėžutes. O kas slepiasi dėžutėje neaišku.

Atmega8 + ds18b20

Parašytas: 2013 12 28, 17:59

maklas

Dažnas dalyvis

pcwortex rašo:

tingiu visa ziureti koda, bet i main.c pradzioje irasyk tokias eilutes. Nes main.c faile nera nurodyta kokias bibliotekas naudosi

Kodas:

#include <avr/io.h>
#include <stdio.h>

Pridėjau.

Gal kas galėtų peržiūrėti visą kodą?

Atmega8 + ds18b20

Parašytas: 2013 12 28, 18:10

pcwortex

Užkietėjęs dalyvis

Nepaziurejau, tavo paveiksliuko. Tau kodas veikia. Maniau, kad neveikia. O kas ziures visa koda, tai man rodos cia nerasi tokiu zmoniu. turi aiskintis pats ir kas neaisku klausti. Bet kiek suprantu, tu susiradai koda, padarei copy paste ir viskas. Pirmiausia pradek nuo lempuciu junginejimu, o ne sok iskart ant protokolu.

maklas rašo:

pcwortex rašo:

tingiu visa ziureti koda, bet i main.c pradzioje irasyk tokias eilutes. Nes main.c faile nera nurodyta kokias bibliotekas naudosi

Kodas:

#include <avr/io.h>
#include <stdio.h>

Pridėjau.

Gal kas galėtų peržiūrėti visą kodą?

_________________
Diplomas tik etikete ant konservų dėžutes. O kas slepiasi dėžutėje neaišku.

Atmega8 + ds18b20

Parašytas: 2013 12 28, 20:47

AlgisL

Senbuvis

pradekim nuo to, kad void therm_read_temperature(char *buffer); gali reiketi didesnio buferio nei 4 baitai, t.y. reikia iki 12 baitu // Buffer length must be at least 12bytes long! ["+XXX.XXXX C"]
gali pasinaudoti kita funkcija, kuri grazina sveikus skaicius void therm_read_temperature2(int8_t *digi, uint16_t *deci) sveikaja dali i uint8_t, bei po kablelio i uint16_t kintamuosius.
perduodant kintamuju adresus gali reiketi nurodyti &kintamasis, nes kintamieji proceduroje aprasyti adresu *kintamasis.

Atmega8 + ds18b20

Parašytas: 2013 12 28, 21:52

maklas

Dažnas dalyvis

Štai kodas:

Kodas:

#include <avr/io.h>
#include <stdio.h>
#include "lcd.h"
#include "tsensorius.h"

int main(void)
{

InitLCD(LS_BLINK|LS_ULINE);
LCDClear();
LCDWriteStringXY(0,0,"Lauko");

while(1)
{
      int8_t x;
      uint16_t y;
      char temp[10];
      therm_read_temperature2(&x,&y);
      sprintf(temp, "%i.%i", x, y);
      LCDWriteStringXY(1,1,temp);
}
}

Tačiau visada išvedama temperatūra: 127.9375

Kur padariau klaidą?

Atmega8 + ds18b20

Parašytas: 2013 12 28, 22:50

AlgisL

Senbuvis

tavo biblioteka nenaudoja INPUT_PULLUP mode, todel reikia DQ (PB5) per 4,7kom varza prijungti prie VCC
beje, jei laidas poilgis, tai PULLUP naudoti nepatartina.

Atmega8 + ds18b20

Parašytas: 2013 12 28, 23:13

maklas

Dažnas dalyvis

AlgisL rašo:

tavo biblioteka nenaudoja INPUT_PULLUP mode, todel reikia DQ (PB5) per 4,7kom varza prijungti prie VCC
beje, jei laidas poilgis, tai PULLUP naudoti nepatartina.

Ačiū tau, viskas sėkmingai veikia.

Atmega8 + ds18b20

Parašytas: 2013 12 29, 01:42

AlgisL

Senbuvis

keliems davikliams lygiagreciai http://siwawi.bauing.uni-kl.de/avr_projects/tempsensor/

Atmega8 + ds18b20

Parašytas: 2013 12 31, 10:06

maklas

Dažnas dalyvis

Vienas daviklis veikia puikiai, tačiau kitas nuolat į LCD išveda -63C. Kur klaida?

Kodas:

#include <string.h>
#include <stdio.h>
#include <stdlib.h>

#include <util/delay.h>
#include <avr/io.h>
#include <avr/interrupt.h>
#include <avr/eeprom.h>
#include "lcd.h"
#include "1wire.h"

/*****************************************************************************\
|* Function prototypes
\*****************************************************************************/
int16_t ds18b20ReadTemperature(uint8_t bus, uint8_t * id);

/*****************************************************************************\
|* Defines for the temperature conversion
\*****************************************************************************/
#define DS18B20_FAMILY_ID 0x28
#define DS18B20_SKIP_ROM       0xcc
#define DS18B20_START_CONVERSION 0x44
#define DS18B20_READ_SCRATCHPAD 0xbe
#define DS18B20_WRITE_SCRATCHPAD    0x4e
#define DS18B20_COPY_SCRATCHPAD       0x48
#define DS18B20_ERROR -1000

/*****************************************************************************\
|* Make the 1-wire "bus" on pin-7 of port ONEWIRE_PORT (see 1wire.h)
\*****************************************************************************/
#define BUS                   ONEWIRE_PIN_0
#define BUS2                   ONEWIRE_PIN_1
#define MAX_DEVICES             1

/*****************************************************************************\
|* Set up stdio
\*****************************************************************************/
uint8_t crap[7];
/*****************************************************************************\
|* Initialise the firmware - program entry point
\*****************************************************************************/
int main (void)
{
signed int temp = 0;
signed int temp2 = 0;

/*************************************************************************\
|* Set up the uart
\*************************************************************************/
InitLCD(LS_BLINK|LS_ULINE);
LCDClear();

LCDWriteStringXY(0,0,"Kraunama...");

/*************************************************************************\
|* Declare the devices and initialise
\*************************************************************************/
static oneWireDevice devices[MAX_DEVICES];
static oneWireDevice devices2[MAX_DEVICES];
oneWireDevice *ds18b20;
oneWireDevice *ds18b202;
oneWireInit(BUS);
oneWireInit(BUS2);

/*************************************************************************\
|* Search for and populate the devices until all CRC's are read correctly
\*************************************************************************/
LCDClear();
LCDWriteStringXY(0,0,"Ieskoma...");
while (oneWireSearchBuses(devices, MAX_DEVICES, BUS) != ONEWIRE_SEARCH_COMPLETE && oneWireSearchBuses(devices2, MAX_DEVICES, BUS2) != ONEWIRE_SEARCH_COMPLETE);

/*************************************************************************\
|* After device enumeration, find the temperature sensor
\*************************************************************************/
LCDClear();
LCDWriteStringXY(0,0,"Ieskomi davikliai...");
ds18b20 = oneWireFindFamily(DS18B20_FAMILY_ID, devices, MAX_DEVICES);
ds18b202 = oneWireFindFamily(DS18B20_FAMILY_ID, devices2, MAX_DEVICES);
/*************************************************************************\
|* Just print the temperature constantly
\*************************************************************************/
LCDClear();
LCDWriteStringXY(0,0,"Lauko");
LCDWriteStringXY(8,0,"Variklio");
while (1)
   {
   temp = ds18b20ReadTemperature(ds18b20->bus, ds18b20->id);
   temp = (temp >> 4);
   temp2 = ds18b20ReadTemperature(ds18b202->bus, ds18b202->id);
   temp2 = (temp2 >> 4);

   char a[6], b[6];
   sprintf(a, "%i.0", temp);
   LCDWriteStringXY(0,1,a);
   sprintf(b, "%i.0", temp2);
   LCDWriteStringXY(9,1,b);
   }
}

/*****************************************************************************\
|* Read the temperature from an identified sensor
\*****************************************************************************/
int16_t ds18b20ReadTemperature(uint8_t bus, uint8_t * id)
{
int16_t temperature;

// Reset, presence.
if (!oneWireDetectPresence(bus))
return DS18B20_ERROR;

// Match the id found earlier.
oneWireMatchRom(id, bus);
//oneWireSendByte(DS18B20_SKIP_ROM, bus);

// Send start conversion command.
oneWireSendByte(DS18B20_START_CONVERSION, bus);

// Wait until conversion is finished.
// Bus line is held low until conversion is finished.
#ifdef ONEWIRE_USE_PARASITIC_POWER
ONEWIRE_RELEASE_BUS(bus);
_delay_ms(850);

#else
while (!oneWireReadBit(bus))
;
#endif

// Reset, presence.
if(!oneWireDetectPresence(bus))
return DS18B20_ERROR;

// Match id again.
oneWireMatchRom(id, bus);
//oneWireSendByte(DS18B20_SKIP_ROM, bus);

// Send READ SCRATCHPAD command.
oneWireSendByte(DS18B20_READ_SCRATCHPAD, bus);

// Read only two first bytes (temperature low, temperature high)
// and place them in the 16 bit temperature variable.
temperature = oneWireReceiveByte(bus);
temperature |= (oneWireReceiveByte(bus) << 8);

uint8_t i;
for(i=0; i<7; i++)
   crap[i] = oneWireReceiveByte(bus);

return temperature;
}

Atmega8 + ds18b20

Parašytas: 2013 12 31, 15:36

AlgisL

Senbuvis

Kodas:

while (oneWireSearchBuses(devices, MAX_DEVICES, BUS) != ONEWIRE_SEARCH_COMPLETE && oneWireSearchBuses(devices2, MAX_DEVICES, BUS2) != ONEWIRE_SEARCH_COMPLETE);

cia pasakai, kad kai nors viena davikli rado, kito ieskoti nebereikia Very Happy

vietoje && naudok || arba davikliu ieskok paeiliui, paradzioje BUS, paskui BUS2

DS18x20x pasizymi tuom, kad juos keleta gali jungti lygiaigreciai prie to paties BUS'o

Kodas:

#define MAX_DEVICES 2

while (oneWireSearchBuses(devices, MAX_DEVICES, BUS) != ONEWIRE_SEARCH_COMPLETE);

temp = ds18b20ReadTemperature(ds18b20[0]->bus, ds18b20[0]->id);
temp = (temp >> 4);
temp2 = ds18b20ReadTemperature(ds18b20[1]->bus, ds18b20[1]->id);
temp2 = (temp2 >> 4);

klaidu gali but del ivairiu dalyku, pvz: nepritempei prie +5V per varza, daviklis (ne)pajungtas ilgu neekranuotu laidu ir t.t.

Atmega8 + ds18b20

Parašytas: 2014 01 08, 16:28

Karolokas

Užkietėjęs dalyvis

Kokio dydžio tavo .hex failas?

Forumo sistema: phpBB

	„Google“ paieška forume

	Kas naujesnio?
Naujienos

	Naujos temos forume
Temoss

	FS25 Tractors Farming Simulator 25 Mods, FS25 Maps, FS25 Trucks
	ETS2 Mods ETS2 Trucks, ETS2 Bus, Euro Truck Simulator 2 Mods
	FS22 Tractors Farming Simulator 22 Mods, FS22 Maps, FS25 Mods
	VAT calculator VAT number check, What is VAT, How much is VAT
	LEGO Mänguköök, mudelautod, nukuvanker
	Thermal monocular Thermal vision camera, Night vision ar scope, Night vision spotting scope
	FS25 Mods FS25 Harvesters, FS25 Tractors Mods, FS25 Maps Mods
	Dantų protezavimas All on 4 implantai, Endodontija mikroskopu, Dantų implantacija
	FS25 Mods FS25 Maps, FS25 Cheats, FS25 Install Mods
	GTA 6 Weapons GTA 6 Characters, GTA 6 Map, GTA 6 Vehicles
	FS25 Mods Farming Simulator 25 Mods, FS25 Maps
	ATS Trailers American Truck Simulator Mods, ATS Trucks, ATS Maps


Script hook v, Openiv, Menyoo gta5mod.net		FS25 Mods, FS25 Tractors, FS25 Maps fs25mods.lt		Optical filters, UV optics, electro optical crystals www.eksmaoptics.com		Reklamos paslaugos SEO sprendimai www.addad.lt		Elektroninių parduotuvių optimizavimas „Google“ paieškos sistemai www.seospiders.lt		FS22 mods, Farming simulator 22 mods, FS22 maps fs22.com